There is no need for fractional or precise right-on-the-dot measurements. Baseboarders™ are designed to yield an incredible amount of flexibility. Each endcap can offer up to 1.75" for a total of 3.5" when using a standard endcap at both ends of the panel.
Tip: Always round down the actual measurement to a whole number (example: 72.75″ measured, order a standard 6′ (72") panel).
Baseboard heaters longer than 7′ will require the use of multiple panels and couplers to register the ends together. Example: 8′ = Two 4′ panels and a coupler to connect them. Learn More.
Standard straight lengths are measured from end to end using the original back plate. If a straight section is missing the back plate, measure from one extreme end of desired coverage to the other extreme end of coverage. Then subtract 1″. This is the ideal panel length.
Do you have special configurations? Corners, bay window, long panels, continuous piping, etc. Click here to learn about accessories for ALL configurations.