The Ideal Commercial Solution
Value At It's Best
Using Baseboarders ensures this will be a project you'll only have to do once. All covers are backed with a warranty against rust.
Installation's a Snap
Slips over existing baseboard heaters. Quick & easy, no tools installation.
Heavy duty galvanized steel. Will not rust and the conductive material ensures efficiency.
Breathe new life into your old baseboards. See how in just 1 minute
Benefits of Working with Us
We offer discount pricing based on the linear feet of panel being ordered.
We understand the importance of seeing and feeling the quality of a product, so we'll gladly send you a material sample.
Made to Order
We are able to make custom cuts to standard panel lengths to help meet the specific requirements of your project.
We'll be happy to quote custom colors for your baseboard covers. Minimum requirement: 100 linear feet.
Short Lead Time
Our facility is dedicated to producing and shipping product fast to keep your project on schedule.
Dedicated Pro Team
Our expert team is here to assist with planning and ordering the materials needed for your specific job.
Need Help? Call Us 1-844-801-6429
How To Order
1 Check the Retrofitting Guide to Ensure Proper Fit
#1 Remove one endcap and the front panel
#2 Measure between the floor and the top of the heater
Objective: 7.5" or greater
If less than 7.5" use the Wall Brackets (WB001) for mounting. This will bring the height up by a minimum of 1.25".
#3 Measure from the bottom of the heating element to the top of the heater
Objective: Between 5″ and 6.75″
If less than 5″ use the Wall Brackets (WB001) for mounting. If the distance is greater than 6.75″, the Premium TALL (BB003) profile should be used.
#4 Measure from the outside face of the finned tube heating element to the back plate
Objective: Less than 3.25″
If larger 4″ x 4″ or 4″ x 6″ commercial style element is in place, a wood molding (shown here) will solve the depth issue.
2 Measure for Lengths & Layout
There is no need for fractional or precise right-on-the-dot measurements. Baseboarders™ are designed to yield an incredible amount of flexibility. Each endcap can offer up to 1.75" for a total of 3.5" when using a standard endcap at both ends of the panel.
Tip: Always round down the actual measurement to a whole number (example: 72.75″ measured, order a standard 6′ (72") panel).
Baseboard heaters longer than 7′ will require the use of multiple panels and couplers to register the ends together. Example: 8′ = Two 4′ panels and a coupler to connect them. Use this handy guide to determine the correct configuration for any length beyond 7’.
Standard straight lengths are measured from end to end using the original back plate. If a straight section is missing the back plate, measure from one extreme end of desired coverage to the other extreme end of coverage. Then subtract 1″. This is the ideal panel length.
Do you have special configurations? Corners, bay window, long panels, continuous piping, etc. Click here to learn about accessories for ALL configurations.
3 Select the Style of Your Choice
View Product Comparison Page for a full list of product lengths and accessories