Premium Baseboard Heater Cover

Premium Baseboard Heater Cover

Quality Your Grandparents Would Recognize.

There was a time when products made of steel would seemingly last forever. This used to be representative of high quality. We think it still is. Our design calls for the use of heavy duty gauges of galvanized steel to craft our product. Historically the baseboard heater industry has been plagued with cheap, thin steel covers that were easily damaged and prone to falling apart when a vacuum cleaner got a bit too close. It seems the original finned tube element manufacturers thought it was acceptable to expect home owners to constantly paint their covers.

Baseboarders® Premium has a solid reputation as the better solution. It’s the original since 2008 and it will continue to impress with a super easy install and a sleek look that is both original and low-key.

  1. Clip to capture the hemmed bottom edge of the panel.
  2. Embossed logo for authenticity.
  3. Endcaps are fabricated in 18 gauge galvanized steel plate.
  4. Panels are fabricated in 22 gauge galvanized sheet steel.
  5. Holes are 1/8" in diameter to allow proper airflow.

Guides & Resources

Use the guides & resources below to help verify your existing baseboard heaters will fit the one-size-fits- most baseboard heater cover replacements

Custom cuts are available at no charge. Just indicate which panels to cut down to what length in the notes section in the cart.
Watch video for tips on DIY panel cutting. We recommend hand shears that are capable of 22 gauge galvanized steel to cut the panels.

Select Panel Lengths & Accessories

  • 4' Premium Baseboard Heater Cover
    $91.80 each
    SKU BB001-48-WHT

    4′ Length panel. When combined with a pair of Baseboarders® Premium endcaps, the panel can span between 48″ and 51.5″. Premium accessories will only fit Premium panels.

  • 5' Premium Baseboard Heater Cover
    $114.75 each
    SKU BB001-60-WHT

    5′ Length panel. When combined with a pair of Baseboarders® Premium endcaps, the panel can span between 60″ and 63.5″. Premium accessories will only fit Premium panels.

  • 6' Premium Baseboard Heater Cover
    $137.70 each
    SKU BB001-72-WHT

    6′ Length panel. When combined with a pair of Baseboarders® Premium endcaps, the panel can span between 72″ and 75.5″. Premium accessories will only fit Premium panels.

  • 2' Premium Baseboard Heater Cover
    $45.90 each
    SKU BB001-24-WHT

    2′ Length panel. When combined with a pair of Baseboarders® Premium endcaps, the panel can span between 24″ and 27.5″. Premium accessories will only fit Premium panels.

  • 3' Premium Baseboard Heater Cover
    $68.85 each
    SKU BB001-36-WHT

    3′ Length panel. When combined with a pair of Baseboarders® Premium endcaps, the panel can span between 36″ and 39.5″. Premium accessories will only fit Premium panels.

  • 7' Premium Baseboard Heater Cover
    $160.65 each
    SKU BB001-84-WHT

    7′ Length panel. When combined with a pair of Baseboarders® Premium endcaps, the panel can span between 84″ and 87.5″. Premium accessories will only fit Premium panels.

  • Wall Bracket (screw included)
    $2.95 each
    SKU WB001-WHT

    Typically used when the original back plate has been removed, when the original back plate is less than 7.25″ in height or in new construction environments. This wall bracket will mount ALL Baseboarders panels.

  • Premium Coupler
    $17.95 each
    SKU CP001-WHT

    Overlaps two panels that are butted up together in a long heater length situation. Premium accessories will only fit Premium panels.

  • Premium Zero Clearance Endcap
    $17.95 each
    SKU ZC001-WHT

    Used when the original back plate terminates within 1/2″ of an adjacent wall. The Zero Clearance Endcap is symmetrical; ie. there is no left or right side. Premium accessories will only fit Premium panels.

  • Premium Inside 90 Degree Corner
    $21.95 each
    SKU IC001-WHT

    Used when two heaters meet at an INSIDE (heaters point away from you) 90 degree angle. Premium accessories will only fit Premium panels.

  • Premium Inside 135 Degree Corner
    $21.95 each
    SKU IB001-WHT

    Used when two heaters meet at an INSIDE (heaters point away from you) 135 degree angle. Common for heaters placed inside a set of bay windows. Premium accessories will only fit Premium panels.

  • Premium Closed Endcap Right Side
    $22.95 each
    SKU EC001-RT-WHT

    Used when the copper pipe bends down into the floor or the wall behind the heater. The right side is defined as YOUR right when facing the heater. Premium accessories will only fit Premium panels.

  • Premium Closed Endcap Left Side
    $22.95 each
    SKU EC001-LF-WHT

    Used when the copper pipe bends down into the floor or the wall behind the heater. The left side is defined as YOUR left when facing the heater. Premium accessories will only fit Premium panels.

  • Premium Open Endcap Left Side
    $22.95 each
    SKU EC002-LF-WHT

    Used when the copper pipe continues on straight through an adjacent wall. There must be at least 1/2″ of clearance between the edge of the back plate and the adjacent wall. The left side is defined as YOUR left when facing the heater. Premium accessories will only fit Premium panels.

  • Premium Open Endcap Right Side
    $22.95 each
    SKU EC002-RT-WHT

    Used when the copper pipe continues on straight through an adjacent wall. There must be at least 1/2″ of clearance between the edge of the back plate and the adjacent wall. The right side is defined as YOUR right when facing the heater. Premium accessories will only fit Premium panels.

  • Premium Outside 90 Degree Corner
    $29.95 each
    SKU OC001-WHT

    Used when two heaters meet at an OUTSIDE (heaters point towards you) 90 degree angle. Premium accessories will only fit Premium panels.

  • Premium Outside 135 Degree Corner
    $29.95 each
    SKU OB001-WHT

    Used when two heaters meet at an OUTSIDE (heaters point toward you) 135 degree angle. Common for heaters placed inside a set of bay windows. Premium accessories will only fit Premium panels.

  • Need a longer length..No problem

    Just enter the inches you’re looking for and we’ll recommend the combination of sizes you’ll need. Don’t forget the couplers.

    Enter Inches

Reviews

5 stars
0 reviews
5 stars
(0)
4 stars
(0)
3 stars
(0)
2 stars
(0)
1 star
(0)

Questions & Answers

Q: Can these panels be custom cut?

A: Yes, panels can be custom cut at the factory or you can cut them onsite using this tutorial.  

Q: How thick is the metal used on the panels and endcaps? 

A: Premium panels are 22 gauge galvanized steel and Premium endcaps are 18 gauge galvanized steel. 

Q: How can I use Premium panels for an application that is longer than 7 feet?

A: Use two Premium panels side by side and place a Premium coupler (CP001) over the area where the panels meet.  Example:  For an 8 foot application, use (2) 4' panels and a coupler.

Q: Can I use Basic accessories on a Premium panel? 

A: Basic accessories will only fit Basic panels due to the differences in design.  Premium accessories are the only option for Premium panels.

Q: How do I measure for panels that meet in a 90-degree corner?

A: Remove endcap and measure side 1 from pipe to corner (wall).  Then subtract 3'' for depth of the adjacent cover. Repeat with side 2.  This will allow space for the panels to meet in the corner piece.

Q: What if my back plate height is shorter than the Premium panel or endcaps height?

A: You will need to use Baseboarders wall brackets (WB001) to raise the application up enough to accommodate the height of the endcap (7-1/2").  Height of the wall bracket is 1-1/4".

Q: What if I no longer have the back plate for my baseboard heater? 

A: You will need to use Baseboarders wall brackets (WB001) to secure the lip of the panel.  Panels 5' or less will need 2 brackets.  6' and 7' panels will need 3 brackets.

Q: How many wall brackets are needed for each panel?

A: Panels 5' or less will need 2 WB001 wall brackets.  6' and 7' panels will need 3 WB001 wall brackets.

Q: Can Baseboarders panels be used on electric baseboard heaters? 

A: Baseboarders product lines are designed for hydronic baseboard heaters, but will work for electric baseboard heaters as well.  

Q: Can Baseboarders panels and accessories be painted?  

A: Yes, you can use the latex or enamel paint of your choice with a roller or spray can.   

Copyright © 2017 Magento, Inc. All rights reserved.