Premium Baseboard Heater Cover

$194.85
SKU:BB001-72-ORB

Premium Baseboard Heater Cover

$194.85
SKU:BB001-72-ORB
As Seen on “Ask This Old House“, the Premium Series is our most versatile as well as most popular product line. It is available in every common panel length and accessory configuration, providing a comprehensive solution for most applications. Baseboarders® Premium provides a clean, modern aesthetic at the right price.
Color
Colors other than white are special order and require extra shipping time.

Please enter a value not greater than 72

Please enter a value not greater than 84

Custom Cut
Need a FREE custom cut?

List your length (per panel) below. NOTE: Custom cut lengths are FINAL SALE. Requested size must be smaller than listed panel size:

Total $194.85
Monthly payments with Affirm. Prequalify Now
Quick Shipping Item

Product leaves the warehouse in 3 business days on orders placed before 10.30am ET.
*Not applicable to custom cuts and special colors.

Using our Fit Calculator is the easiest way to determine length and necessary accesories for your project. Find My Fit

Premium Baseboard Heater Cover
Total $194.85

A Truly Modern Look

After
Before

The Premium Series is our most versatile product line. It is available in every common panel length and accessory configuration, providing a comprehensive solution for most applications. Baseboarders® Premium provides a clean, modern aesthetic at the right price.

Configuration Compatibility: Straight, 90° Inside/Outside Corners, and 135° Inside/Outside Corners.

Installation: Designed to be easily installed by the end user. No tools necessary.

Warranty: The Premium Series offers a lifetime warranty against rust.

Material: The Premium Series panels - 22 gauge galvanized steel; end caps - 18 gauge galvanized steel.

Usage: Baseboarders® is designed for hydronic baseboard heaters. For use with electric baseboard heaters Learn More

Panel Length: The Premium Series panels are 2’ to 7’ in length. Visit the Measurement Guide for measuring instructions.

Custom Cut: If you require a panel to be cut down to a specific size, then please indicate the length above under the section ‘Need a FREE custom cut’. There is no charge for custom cuts; however, they add a two week lead time and are non-returnable.

Finish: Available in semi-gloss powder coat in Standard White and three Special Order Colors (Cool Gray, Oil Rubbed Bronze, and Cast Iron Black). White is available for Quick Ship. Special Colors have a two week production lead time.

Your Style, Our Covers

Guides & Resources

Use the guides and resources below to be 100% ready to get started on your baseboard heater replacement covers.
Premium Tall Endcaps are fabricated in 18 gauge galvanized steel.
Premium Tall Panels are fabricated in 22 gauge galvanized steel.
Holes are 1/8" in diameter to allow proper airflow, from the top of the panel.

Buy Now, Pay Later

No money down. No deferred interest. A payment schedule that suits your budget.
Learn More

You Might Also Like

×

Why do I need an End Cap?

Endcap Closed

used when the copper pipe bends down into the floor or into the wall behind the heater.

Endcap Open

Used when the copper pipe continues straight through an adjacent wall.

Endcap Zero Clearance

used when the original back plate terminates less than 0.5" from the adjacent wall.

Why do I need a Coupler?

Coupler
Overlaps two panels that are butted up together to create a longer panel.

Why do I need a Corner?

Inside Corner Connector-90
Used when two heaters meet at an INSIDE (heaters point away from you) 90 angle.
Outside Corner Connector-90
Used when two heaters meet at an OUTSIDE (heaters point towards you) 90 angle.
Inside Corner Connector-135
Used when two heaters meet at an INSIDE (heaters point away from you) 135 angle. Common for heaters placed inside a set of bay windows.
Outside Corner Connector-135
Used when two heaters meet at an OUTSIDE (heaters point towards you) 135 angle. Common for heaters placed inside a set of bay windows.

Why do I need a Bracket?

Wall Brackets:
Typically used when the original back plate has been removed, when the original back plate is less than 7.5" in height (less than 9.5" for Premium Tall), or in new construction environments. Panels that are 5' long or less need 2 wall brackets. Panels that are longer than 5' need 3 wall brackets.

Why do I need a Endcap?

Endcap:
Typically used when the original back plate has been removed, when the original back plate is less than 7.5" in height (less than 9.5" for Premium Tall), or in new construction environments. Panels that are 5' long or less need 2 wall brackets. Panels that are longer than 5' need 3 wall brackets.